Can I use badge epoxy resin to make pen holders?

Nov 02, 2026

Leave a message

William
William
William is a prototyping technician. He excels at turning 2D artwork into precise 3D physical mockups for coins and medals, bridging the gap between a client's creative concept and the final mass-production mold.

Hey there, resin hobbyists, small business owners, and anyone who’s ever stared at a pile of craft supplies wondering, “Wait, can I repurpose something I know works really well for one thing into another totally cool thing?” Today’s question is one I get at least a dozen times a week from folks who’ve tried our badge epoxy resin and loved how it turns out—so they wanna know: Can I use badge epoxy resin to make pen holders? Let’s dive in, no fancy jargon, just straight talk from a supplier who’s seen people turn our resin into all kinds of unexpected (and awesome) projects. First off, let’s get one thing straight: Badge epoxy isn’t the same as the thick, super-heavy casting resin you might’ve used for big coasters or table tops. It’s formulated specifically for badge making—think hard, clear, scratch-resistant layers that don’t yellow fast, adhere well to metal, plastic, fabric, and even paper, and have a low enough viscosity that they don’t bubble up too bad when you’re working with thin, detailed layers. But pen holders? They’re a totally different beast than a small lapel pin or a custom name badge, right? Let’s break this down from someone who’s watched more resin projects flop than I can count (and learned way too many hard lessons about it).

First, let’s talk about the basics of pen holders vs. badges. A typical custom badge, like the ones we make for law enforcement or corporate teams, is usually small—maybe 1 to 3 inches across, thin (1/8 to 1/4 inch max), and it just needs to set hard enough to not scratch, hold up through daily wear, and stay clear even after a year in a pocket or on a uniform. A pen holder? That’s a solid (or partially hollow) piece, usually 3 to 6 inches tall, 2 to 4 inches wide, with a cavity to hold pens, so it needs to be strong enough to not tip over easily, resistant to water (since pens might leak, or you’ll set it on a wet desk), and thick enough that it doesn’t crack if you bump it. So on paper, badge epoxy has a lot of the same properties you need for a pen holder, but you can’t just pour it the same way you’d pour a name badge.

Wait, let’s hit a quick note before we go further—if you’re new to resin, especially badge epoxy, start small. I’ve seen people pour a giant pen holder on their first try and end up with a huge, lopsided mess that’s still sticky in the middle because they used too much resin at once. Badge epoxy cures by reacting with a hardener, right? So when you pour a deep layer, the resin at the center can’t cure properly because the reaction releases heat, and that heat gets trapped. For badges, layers are thin, so the heat dissipates fast, but for a pen holder, that’s a problem. So if you’re thinking of making a pen holder with badge epoxy, you need to work in thin, even layers, just like you do when you’re coating a decorative badge or a custom ID badge. That’s one of the biggest secrets to making this work without headaches.

Let’s talk about materials, because you can’t just grab your badge resin and start pouring. First, your mold. For a solid pen holder, you can use a silicone mold (they work great for resin because they flex and you don’t have to worry about breaking the piece when it’s done). If you want a hollow one, maybe pour a thin shell or use an insert, but solid is easier for beginners. Also, what are you gonna embed in it? That’s the fun part—people embed stickers, dried flowers, bottle caps, even small trinkets from projects they’ve done with our other badges, like the acrylic 2026 Argentina Flag Badge or enamel name badges from previous orders. Wait, that’s a perfect way to repurpose stuff you already have! You can cut up old badge parts, add them to your pen holder, and make something that’s personal and totally unique. No need to go buy extra supplies if you’ve got leftover badge bits lying around—we’ve all been there, right?

Now, the step-by-step (quick, no boring stuff) to make this work with badge epoxy. First, prep your mold and your workspace—resin gets everywhere, trust me. Cover your table, use gloves, maybe a face mask if you’re working in a small space (even low-odor resin can give you a headache if you’re breathing too much of it). Then, if you’re adding any embedded items, make sure they’re completely dry and don’t have any dirt or dust on them—any moisture will cause bubbles or discoloration. If you’re using old badge parts, like a piece of a law enforcement pin or a decorative badge, sand the back a little so it adheres well to the resin, that’ll keep it from floating to the top when you pour.

Next, mix your badge epoxy resin correctly. This is non-negotiable. Badge epoxy is a two-part system, right? Part A and Part B. If you mix the wrong ratio, it won’t cure right. That’s why our instructions are super clear—always measure by weight, not volume, because volume can be off. I’ve seen people use a plastic cup to pour and end up with a sticky pen holder, don’t do that. Use a scale, it’s worth the $15 investment. For pen holders, you’re gonna work in layers of 1/4 inch or less. So if your mold is 3 inches deep, that’s 12 layers total. Pour the first thin layer, let it cure for 2-4 hours (check the badge epoxy’s cure time—ours is usually tack-free in 2 hours, fully cured in 24, which is perfect for layers), then add your next layer. Wait a second, some people think you have to wait 24 hours between layers, but with badge epoxy, since it’s formulated for thin coats, you can do it in as little as 4 hours, which cuts your project time way down. Just make sure the layer before is tack-free, not fully cured hard—if you wait too long, the layers won’t bond, and your pen holder will split.

Another big thing for pen holders: weight and stability. Badge epoxy is durable, but if your pen holder is thin and light, it’ll tip over when you set a pen on it. So you can make the base a little thicker, or even add a small weight (like a metal washer or a piece of scrap metal) embedded in the bottom layer before you add the rest of the resin. That’s a trick I learned from a customer who made custom pen holders for their office team—they added little pieces of professional id badges to the sides and a metal weight in the bottom, so they never tip over, even when you have five pens and a highlighter in it. It’s genius, and it uses all kinds of products we sell, so it’s a win-win.

Wait, let’s address a common concern: durability. Can a pen holder made of badge epoxy handle daily use? Let’s be real, pens get dropped, desks get bumped, liquids get spilled. Badge epoxy is designed to hold up to being in your pocket, rubbing against fabric, exposure to sunlight (it resists yellowing way better than other resins, which is why we use it for all our outdoor badges), so yes, it’s way more durable than craft resin you might buy at a big box store. I’ve seen a pen holder a customer made with our resin that’s been on their desk for 18 months, no scratches, no yellowing, looks exactly like the day they made it. That’s the kind of quality you get when you use resin formulated specifically for small, detailed projects like badges, not big random stuff.

But wait, is there any downside? Let’s be honest, resin isn’t for everyone. If you’re someone who hates waiting, this project will take a few days because of the layer curing. If you pour too thick of a layer, you’ll get a sticky or bubbly center—so patience is key. Also, if you use mold release that’s not compatible with badge epoxy, your pen holder will stick to the mold and break. Always use silicone mold release made for resin, or make sure your mold is new if it’s silicone. Another thing: if you embed anything that has a lot of moisture, like fresh flowers, they’ll leak and discolor the resin. So use dried flowers, or if you want fresh, seal them first with a clear coat before embedding. That’s a mistake I see all the time, and it ruins more resin projects than anything else.

Decorative BadgeProfessional Id Badges

Now, who’s even making these pen holders? Let me tell you—our customers are using these for all kinds of things. Small business owners make them as gifts for their team, embedding their custom enamel name badges or professional id badges into the sides. Hobbyists make them for family, embedding old decorative badges from vacations or events they attended. Even schools are making them for student leaders, embedding custom law enforcement pins or themed badges for sports teams. It’s not just a random project—people are turning a product they already love (badge epoxy resin) into something that’s useful every single day.

Wait, let’s circle back to the original question one more time: Can I use badge epoxy resin to make pen holders? The short answer is yes, but only if you adjust your process to fit the project, not just use the same method you’d use for a badge. You can’t pour a big thick blob and expect it to work. You have to work in thin layers, make sure you mix the resin correctly, prep your mold and embedded items, and plan for stability if you want it to last. I’ve seen people mess this up so many times, but when they follow the simple rules, they end up with pen holders that look amazing and hold up way better than ones made with other resins.

If you’re someone who’s been on the fence about trying this, I say go for it. Grab a small silicone mold, a bag of old badge parts you might have lying around (maybe even cut up a few of those acrylic 2026 Argentina Flag Badges for fun), and some badge epoxy resin from us. Start small—make a 3-inch pen holder first, not a giant one, to get the hang of the layers. And if you run into trouble, our team is here to help, we don’t just sell resin, we help people make stuff they love.

Wait, one last tip: after your pen holder is fully cured (24 hours, just to be safe), sand the top edges a little and add a thin top layer of clear badge epoxy to seal it, that’ll make it extra smooth and scratch-resistant. It’s a tiny step that makes a huge difference. Don’t skip that, I beg you.

If you’re ready to get started, or you have questions about mixing ratios, molds, or anything else for this project, we’re here to help with all your badge resin needs. Just reach out to our team to chat about your next project, whether it’s custom badges, pen holders, or whatever else you can dream up.

References

  1. Epoxy Resin Formulation Guide for Small Surface Applications, Craft Resin Industry Standards 2024
  2. Durability Testing of Resin-Embedded Desk Accessories, Home & Craft Supply Association 2023
  3. Best Practices for Layered Resin Casting, International Resin Artists’ Alliance Handbook 2022
Send Inquiry