Agricultural Equipment Badge

Agricultural Equipment Badge
Details:
Material :Aluminium, stainless steel, brass, copper, zinc alloy
Thickness :0.3–1.5 mm (customizable)
Size / Shape :Custom per artwork or sample; round, square, rectangular, oval, irregular
Process :Stamping, etching, die-casting, engraving, cutting, embossing
Surface :Polishing, brushing, sandblasting, oxidation, plating, powder coating, anodizing
Printing / Marking :Silk screen, pad printing, laser engraving, digital printing, offset printing
Send Inquiry
Description
Send Inquiry

Hangzhou Ruijia Technology Co., Ltd. is one of the most reliable manufacturers and suppliers of agricultural equipment badge in China, also supports customized service. Welcome to wholesale bulk discount agricultural equipment badge for sale here from our factory. If you have any enquiry about free sample, please feel free to email us.

 

Laser Marking SS QR Code Table Label For Cafe

Agricultural Equipment Badge
Agricultural Equipment Badge
Agricultural Equipment Badge

 

Metal badges for tractors, telehandlers, sprayers and harvesters share one working condition that decorative emblems never face: continuous outdoor exposure to soil, slurry, pressure-washing and UV radiation, often across a 10-year machine service life. This badge is built around that duty cycle, not around showroom appearance.

 

Base material selection follows the mounting location, not a single default.

 

For body panels and hood emblems where weight and cost matter, 1.0 mm–2.0 mm anodized aluminum is the starting point. The anodizing layer is controlled at 20–25 microns (ISO 7599 Class 20 or Class 25), a thickness range that holds up under neutral salt spray testing for 1,000 to 3,000 hours without white rust or pitting. Thinner decorative anodic films in the 5–10 micron range break down within one to two seasons under UV and fertilizer residue, which is why they are not offered for exterior agricultural use. Where the badge sits on a cast-iron grille or a heavy chassis rail, zinc alloy die-casting gives the required 3D relief and impact resistance; the same process produces the crisp raised lettering and enclosed geometry that stamped sheet cannot reproduce at the same depth. Stainless steel 304 or 316 is reserved for slurry-exposed surfaces and wash-down zones where chloride attack is continuous.

 

 

 

Specifications

Parameter Range / Option
Material Aluminium, stainless steel, brass, copper, zinc alloy
Thickness 0.3–1.5 mm (customizable)
Size / Shape Custom per artwork or sample; round, square, rectangular, oval, irregular
Process Stamping, etching, die-casting, engraving, cutting, embossing
Surface Polishing, brushing, sandblasting, oxidation, plating, powder coating, anodizing
Printing / Marking Silk screen, pad printing, laser engraving, digital printing, offset printing
Salt spray / corrosion data Please consult us for detailed data
Positioning accuracy ±0.01 mm (core automated processes)
Mounting Self-adhesive, screw fixed, rivet, magnetic, buckle
Color Silver, gold, black, blue, red, bronze, nickel, chrome, Pantone, CMYK
Compliance RoHS, REACH, EPR, IEC, ISO 9001
QC 12 inspection nodes; defective rate below 3%
MOQ 100–500 pcs/sets/㎡, negotiable for special requirements
Sampling 3–5 working days after design confirmation
Bulk lead time 15–30 working days
Tooling lead time Please consult us for detailed data
Warranty Regular products 1 year; weather-resistant products 3 years
Agricultural Equipment Badge
01.

Surface treatment is specified by exposure, not by finish name.

Painted zinc alloy badges use a multi-layer system: copper strike, bright nickel, then either chrome or a UV-stable topcoat. Without the copper and nickel barrier layers, zinc substrate corrosion begins at cut edges and pinholes within the first year of field use. Anodized aluminum badges receive a hydrothermal seal after dyeing; the seal closes the porous oxide structure and prevents fertilizer and pesticide solutions from bleeding into the color layer. Laser-engraved or screen-printed serial numbers and CE markings remain legible because the marking sits beneath the sealed anodic layer rather than on top of it.

02.

Fixing method and tolerance are quoted against the OEM drawing.

Badges are supplied with pre-punched holes for M4–M6 rivets or self-tapping screws, or with a high-tack acrylic adhesive backing for flat panel mounting. Hole position and badge outline are held to ±0.1 mm on stamped aluminum parts; die-cast zinc alloy badges are held to ±0.15 mm across the mounting hole pattern. The 28 automatic stamping presses in the stamping workshop run at ±0.01 mm positioning accuracy, which matters when a badge must align with an existing hole pattern on a tractor hood that has already been tooled. Tooling for a new badge profile typically runs 15–20 working days; sampling is 3–5 working days from approved artwork.

Agricultural Equipment Badge

 

 

 

Core Products

Aluminium Nameplates

Aluminium Nameplates

Stainless Steel Name Plates

Stainless Steel Name Plates

Brass & Zinc Alloy Badge

Brass & Zinc Alloy Badge

QR Code Barcode Asset Tag

QR Code Barcode Asset Tag

Acrylic & Traffolyte Label

Acrylic & Traffolyte Label

Electroformed Nickel Sticker

Electroformed Nickel Sticker

Wine & Perfume Bottle Label

Wine & Perfume Bottle Label

ABS Car Badge

ABS Car Badge

Metal Phone Stickers

Metal Phone Stickers

 

 

 
 

Quality control production line

Customized raw materials
1 Customized raw materials
icon
Die-cutting of raw materials
2 Die-cutting of raw materials
icon
Reflective film coating and printing
3 Reflective film coating and printing
Die-cutting
4 Die-cutting
icon
Hot stamping
5 Hot stamping
icon
Embossing
6 Embossing
Screen printing workshop
7 Screen printing workshop
icon
Stamping
8 Stamping
icon
Natural drying
9 Natural drying
Packing
10 Packing
icon
Warehouse shipping
11 Warehouse shipping
 
 

Compliance documentation is prepared for the destination market

Hangzhou Ruijia Technology Co., Ltd.
 

Agricultural machinery sold into the EU falls under REACH obligations for SVHC communication and, where applicable, SCIP database reporting for articles containing candidate list substances. RoHS applies where the badge includes a printed or engraved electronic identification element. Production batches are accompanied by material declarations covering substrate alloy, plating chemistry and coating composition. ISO 9001 process control and 12 in-process inspection points keep dimensional rejects below 3%; salt spray and adhesion test reports are issued per batch on request.

Hangzhou Ruijia Technology Co Ltd
 
 

Customer reviews

Customer reviews

 

Our factory

Production Base and Workshop Configuration

Production Base and Workshop Configuration

Production Capacity and Equipment Strength

Production Capacity and Equipment Strength

Quality Control and Compliance System

Quality Control and Compliance System

Package & Delivery

 

Package: Standard export package or Custom
Delivery: By air express, by sea

 

Package & Delivery

 
 

Exhibition photos

Exhibition photos
Exhibition photos
Exhibition photos

 

 

FAQ

 

Q: What salt spray duration can the badge actually pass?

A: For anodized aluminum exterior badges, 1,000 hours NSS (ASTM B117 / ISO 9227) is the standard production benchmark at 20–25 micron anodic film thickness. Zinc alloy die-cast badges with copper-nickel-chrome plating are tested to 48–96 hours NSS depending on the plating stack agreed at quotation. Test reports from the batch are available before shipment.

Q: Can the badge carry a serial number or QR code that survives the machine's service life?

A: Yes. Laser engraving into anodized aluminum produces a permanent mark beneath the sealed oxide layer. For die-cast badges, the serial or QR code is either engraved into the tooling and cast in relief, or laser-marked after plating. Both methods remain readable after the cleaning and chemical exposure typical of agricultural equipment.

Q: What information do you need to quote a badge with mounting holes that match an existing panel?

A: A dimensioned drawing or a 1:1 scan of the existing badge with hole center coordinates and panel thickness. If only a physical sample is available, we measure the hole pattern and mounting clearance and return a CAD outline for confirmation before tooling. For adhesive-mounted badges, the target substrate material (painted steel, plastic, or galvanized panel) determines the adhesive grade.

Q: Is the tooling exclusive to our brand?

A: Yes. Tooling produced for a customer's badge profile is not used for any other buyer and is stored under the customer's part number. A tooling ownership clause is included in the quotation, and the mold can be transferred to the customer's nominated supplier at the end of the program if required.

 

Contact us for more information.

 

Hot Tags: agricultural equipment badge, China agricultural equipment badge manufacturers, suppliers, factory

Send Inquiry