Hangzhou Ruijia Technology Co., Ltd. is one of the most reliable manufacturers and suppliers of dangerous high voltage sign in China, also supports customized service. Welcome to wholesale bulk discount dangerous high voltage sign for sale here from our factory. If you have any enquiry about free sample, please feel free to email us.
Etched Electrical Danger Sign 1000 Volts High Voltage Warning Plate



An etched metal warning plate for electrical equipment rated at 1000 V and above. The legend - lightning bolt, "DANGER", "HIGH VOLTAGE", "1000 VOLTS" - sits in etched recesses below the surface of the plate, not on top of it, so it survives solvent wipe-down, pressure washing and long UV exposure without lifting at the edges. Typical build is 0.5 mm aluminium or 0.8 mm stainless steel, characters filled with red or black enamel, background left brushed, anodised or painted. Also ordered under the description etched electrical danger sign, 1000 volts high voltage warning plate.
Specifications
| Parameter | Detail |
| Substrate | Aluminium, stainless steel, brass, zinc alloy |
| Substrate grade for this item | Consult us for details on the grade offered for your site conditions |
| Thickness | 0.3 mm – 1.5 mm (0.5 mm aluminium and 0.8 mm stainless steel are the common builds) |
| Standard plate sizes | 50 × 100 mm, 60 × 120 mm, 80 × 160 mm; other sizes cut to your artwork |
| Etch depth tolerance | ±0.005 mm |
| Legend production | Chemical etching; recessed characters filled with enamel or resin |
| Colour options | Red, black, yellow, white, Pantone matching; two- and three-colour layouts |
| Surface finish | Brushed, polished, sandblasted, anodised, powder coated, electrophoretic black |
| Fixing | Pre-drilled holes for screws or rivets; adhesive backing; both on one plate if required |
| Hole position tolerance | Consult us for details |
| Service temperature range | Consult us for details |
| Packaging | Individually bagged, counted into export cartons |
| MOQ | 100 – 500 pcs depending on size and colour count |
| Sample lead time | 3 – 5 working days after artwork approval |
| Production lead time | 15 – 30 working days |
| Certifications | ISO 9001; RoHS, REACH, EPR, IEC |
| Warranty | 1 year standard; 3 years on weather-resistant outdoor builds |
Choosing the substrate

Indoor control cabinets, motor control centres and test benches are usually built on 0.5 mm aluminium with an anodised or painted background. Aluminium cuts clean, weighs little, and the anodised layer keeps the plate from oxidising in a switch room.
Outdoor work - transformer enclosures, pole-mounted boxes, substation gates - moves to stainless steel at 0.8 mm. A stainless plate bolted to a steel housing flexes less under wind load and does not galvanically degrade at the fixing points the way a thin aluminium plate can when it is riveted to a dissimilar metal. For coastal or high-humidity sites, tell us the exposure and we will confirm the grade and coating stack before quoting.
Brass and zinc alloy are available where the plate is decorative as well as functional, or where the customer's specification already names a material.
How the legend is produced
The artwork is etched, not printed. Six etching lines run the plate through a controlled spray-etch process with a depth tolerance of ±0.005 mm, which holds fine text - a 2 mm cap height stays legible after fill. Etched characters have a physical edge, so the red or black fill cannot creep into the background the way screen ink can on a flat sheet.
Where the layout uses several colours, the recesses are masked and filled in separate passes and cured between each one. Colour boundaries follow the etch line rather than an ink edge, which is why a two-colour high voltage plate reads cleanly at a distance.
Painted and coated surfaces are checked with a cross-hatch adhesion test; our painted lines hold 4B or better.

Fixing to the enclosure
Three configurations cover most orders:
Holes only
3.2 mm or 4.2 mm pre-drilled, positioned to your enclosure drawing, for M3 or M4 screws and rivets.
Adhesive only
Pressure-sensitive backing for cabinets where drilling voids the IP rating or the warranty.
Holes plus adhesive
Screw-fixed with the adhesive holding the plate flat against a curved or textured surface.
Send the enclosure drawing and we will place the holes to match. Hole-to-edge distance, corner radius and plate thickness are confirmed on the approval drawing before the etch tool is cut.
Core Products

Aluminium Nameplates

Stainless Steel Name Plates

Brass & Zinc Alloy Badge

QR Code Barcode Asset Tag

Acrylic & Traffolyte Label

Electroformed Nickel Sticker

Wine & Perfume Bottle Label

ABS Car Badge

Metal Phone Stickers
Quality control production line











Ordering
Artwork accepted as AI, CDR, PDF, PSD, JPG or PNG. We return a dimensioned approval drawing showing plate size, hole positions, colour callouts and material before production starts. Free digital proofs and physical pre-production samples are available; sample cost depends on size and colour count.
Production capacity is 12 million metal nameplates and labels a year across a 35,000 m² plant with 86 automated machines, so a 5,000-piece run and a 200-piece run go through the same etch and inspection flow. Shipments leave from an 8,000 m² warehouse near the port; EXW, FOB, CIF, CFR and DAP terms are all quoted. Payment by T/T (30% deposit, 70% before shipment), L/C at sight, D/P or Western Union.

Customer reviews

Our factory

Production Base and Workshop Configuration

Production Capacity and Equipment Strength

Quality Control and Compliance System
Package & Delivery
Package: Standard export package or Custom
Delivery: By air express, by sea

Exhibition photos



FAQ
Q: Can the plate carry our own symbol geometry rather than a stock lightning bolt?
A: Yes. We etch from your artwork, so the bolt proportions, the "DANGER" typeface and the language on the plate are yours. If your specification names a particular standard version of the symbol, send the reference and we will confirm against the artwork before tooling.
Q: Is the "1000 VOLTS" text printed or etched?
A: Etched and filled. The characters are recessed into the substrate and the fill sits inside the recess, so abrasion removes the surface around the text rather than the text itself. Printed legends on flat sheet lose legibility at the edges first; etched ones do not have that failure mode.
Q: Which build should we specify for an outdoor substation on a coastal site?
A: Stainless steel at 0.8 mm is the usual starting point, with the grade and any additional coating confirmed against your exposure conditions. Send the site description - distance to the coast, mounting height, whether the plate faces salt spray directly - and we will quote the material and finish stack that fits.
Q: What are the MOQ, sample and delivery times?
A: MOQ runs 100 – 500 pcs depending on plate size and the number of fill colours. Samples take 3 – 5 working days from artwork approval; bulk production runs 15 – 30 working days. Transit to major ports is 7 – 45 days depending on the route and mode.
Q: How do you handle a mixed order - some plates with holes, some with adhesive backing?
A: Both are treated as separate line items on one approval drawing and packed in labelled inner bags so the installer does not have to sort them on site. Mixed-material orders (aluminium for indoor cabinets, stainless for the outdoor units on the same project) are quoted and produced together.
Contact us for more information.
Hot Tags: dangerous high voltage sign, China dangerous high voltage sign manufacturers, suppliers, factory

